Electric Heating 70cm Diameter Middle Type Green Tea Panning Machine DL-6CST-D70

The diameter of this model is 70cm, and the length of the inner straight section is 1000mm. Using 380V voltage, it can process 50 kg of fresh leaves each hour.
Pneumatic shock absorber design, the machine automatically falls back, and the falling speed is stable, the inner barrel uses a new type of environmentally friendly fireproof insulation material, thickness up to 20mm, greatly reduces heat loss and saves energy by 30%, an exhaust fan is added to the rear, which can be turned on and off manually, which can quickly blow away the hot and humid air inside the machine to prevent the tea from being stuffy and affecting the taste.

① Control Panel ② Thermometer ③Outer Barrel ④Inner Barrel ⑤Support Wheel ⑥Bottom Wheel

⑦ Temperature Sensor ⑧Electric Heating Tube ⑨Balance bolt ⑩Handle ⑪Combustion Zone ⑫Support Frame

1. Using calcium silicate board, increasing the heat preservation effect and meeting the food hygiene requirements;
2. There is a handle on the drum, which can be manually roasting in case of a sudden power failure, so that the tea is not wasted.
3. Intelligent temperature control system, easy to operate and precise control;
4. Optimized deceleration system, the machine speed is stable while ensuring that the torque is large enough and running smoothly.

5. Adopt dual temperature control design, ensure the precise control of temperature and ensure the quality of tea.
6. More controllable water vapor emission system for more energy saving.

Electric Heating Green Tea Panning Machine is suitable for processing green/oolong / herbal tea, the following is the working time required for the above tea production.

For Green tea, the fixation time is 4-8 mins

For Oolong tea, the fixation time is 4-8 mins

For Herbal tea, the fixation time is 4-8 mins

The above data is for reference only, and the specific processing time shall be determined according to the actual situation.

Electric Heating Green Tea Panning Machine specification list:

Model: DL-6CST-D70

Dimensions: 980×1565×1630 mm

Voltage: 380/50 V/Hz

Drum inner diameter: 700 mm

Drum inner length: 1000 mm

Drum speed: 5-37 rpm

Heating type: Electric heating

Efficiency: 50 kg/h

If you have a special need for Electric Heating Green Tea Panning Machine, it can be customized according to the needs of customers.

Dense electric heating pipe surrounds the whole fixation drum to ensure the uniform heat of cylinder board, tea fixing more evenly.

Integrated microcomputer control system, the fixation time can be intelligently controlled.

When tea fixation, the speed of the machine can be adjusted, according to the tea of different producing areas, different speed can be adjusted.

Top cooling switch design, after tea roasting processing, open the cooling valve, can accelerate heat dissipation.

The inner barrel uses a new type of environmentally friendly fireproof insulation material, thickness up to 20mm, greatly reduces heat loss and saves energy by 30%.